|
|
|
| |
|
|
| |
|
|
| |
Otec DF Machine Extends Life and Boosts Performance of HSS and Carbide Tools
The cutting edge condition of HSS and carbide tools is critical to their stability, reliability and life expectancy in use. Tiny burrs formed during the manufacturing process are usually the cause of early failures. Any benefits of protective coatings are compromised when applied over these burrs. When the tool is first used the burrs break off to form a ‘bare spot’ which wears rapidly. Finishing Techniques, can now offer a new subcontract service to solve these problems for manufacturers without capital outlay.
Processing HSS and carbide tools in an Otec DF machine removes the burrs, ensures a uniformed honed edge and smoother surface finish, no matter what the geometry, before protective coatings are applied.
Tools that have been processed in an Otec DF machine run more smoothly when in use and the risk of edge chipping is reduced. Improved edge stability means higher cutting speeds can be achieved to boost productivity. Importantly, tool life can be extended by three or four times over an untreated tool, meaning cost savings as tools work harder and longer. In addition, once the optimum deburring process has been set-up, the finishing quality is 100 percent repeatable and helps to lower unit costs.
Jonathan Dean, managing director of Finishing Techniques, explained, “We have vast experience solving deburring problems for manufacturers, both as a subcontractor and machine supplier. The new DF holders and processing capability, designed specifically for HSS and carbide tools, means we are really getting down to the microscopic level of surface perfection to extend tool life and performance. Through our subcontract service this technology is available to everyone without significant capital outlay. It is also a great way to trial the Otec DF finishing machine and deburring process, if an equipment purchase is being considered.”
Technical details and pricing information for HSS and carbide tool deburring is available from Finishing Techniques 01706 825 819. In addition to machine sales and sub-contracting facilities, the company also offers a sample processing service, so there are plenty of ways for tool manufacturers to find out how they can improve the quality of their cutting tool products.
More Information
Jonathan Dean, Finishing Techniques Ltd
Holcombe Brook, Bury, BL0 9SA, Tel. 01706 283921
E-mail: jonathan@fintek.co.uk Web: www.fintek.co.uk
Advertising Enquiries
Jo Ashburner, Tel. 01706 283926 E-mail: jo@fintek.co.uk
High res image can be downloaded from: http://www.clickintopr.com/editors/articleDetail.asp?pjID=500
August 02, 2007
|
|
|
|
|
|
|
|
|
| |
Please feel free to use the news
releases and images on this site in your publications
(printed or online).
Contact details for further information
are given at the end of each release. |
|
| |
|
|
| |
|
|
| |
|
|
| |
Recent Press Releases: |
|
| |
|
|
| |
Certification for Enterprise Manufacturing Solutions from QiSOFT
SAP certification has been awarded to Leyland based QiSOFT for a new browser-based version of its enterprise manufacturing intelligence software suite, QIS - ERP1.0. This new version was developed using the SAP NetWeaver technology platform and it fully integrates with the QiSOFT software and other third party systems through SAP XI/SAP PI interfaces....
release date: 16/08/2010
view the full press release |
|
|
|
|
| |
Sussex Sound Therapy Expert to Hold Awareness Event
One of the leading pioneers in Sound Therapy is planning a special event at the University of Chichester so people can get a taste of the life changing and healing benefits of sound therapy and help her mark the tenth birthday of the academy....
release date: 13/05/2010
view the full press release |
|
|
|
|
| |
Eight New FMC Boards Offer Up to 5 Gig Samples/Sec
Reno Nevada, USA - The release of eight new analog-to-digital / digital-to-analog boards based on the FPGA mezzanine card standard (FMC) has been announced by 4DSP, LLC.
...
release date: 10/03/2010
view the full press release |
|
|
|
|
| |
Digital Bury Glimpses the Future in 02 Technical Chief's Talk
On Thursday evening Dr Mike Short, vice president of research and development at Telefonica Europe, gave an enthusiastic audience from the digital and creative community in Bury an insight into the connected world....
release date: 04/03/2010
view the full press release |
|
|
|
|
| |
Top R&D Man at O2 To Give Bury Digital Business Group an Exclusive Talk
Dr Mike Short, vice president for research and development at leading European mobile phone company Telefonica O2
Dr Mike Short, vice president for research and development at leading European mobile phone company Telefonica O2 UK, is to address a meeting of Digital Bury on February 25, 2010....
release date: 12/01/2010
view the full press release |
|
|
|
|
| |
Advanced DSP Application Design Will Be a Blast With New Xilinx Virtex 6 FPGA Based XMC & PMC Boards
The FM680, the first in a series of Xilinx Virtex 6 FPGA based XMC and PMC boards, has been launched by 4DSP Inc....
release date: 07/12/2009
view the full press release |
|
|
|
|
| |
Not All Golf Clubs Sold Online are Fake Says Golf Marketplace Backed by 180 PGA Professionals
In the light of the recent Ebay counterfeit golf equipment scandal, perpetrated by a global criminal gang over several years and raking in millions, JamGolf.com Marketplace is spearheading a campaign to assure online shoppers that they can still buy genuine golf clubs and accessories on the web at low prices....
release date: 29/09/2009
view the full press release |
|
|
|
|
| |
Video Imaging and Compression Performance Breaks the Price-Performance Barrier in Three VID300 Series PMCs launched by 4DSP
The new Altera Cyclone III FPGA based video image and compression boards offers excellent cost-performance with abundant FPGA logic resources for specialized image processing....
release date: 24/09/2009
view the full press release |
|
|
|
|
| |
New Online Electrical Protection Store Leads with CPN Consumer Units and Circuit Breakers
To provide a cost effective alternative to the generalist DIY superstore, DirecElec has launched their online store for electrical protection devices. The company offers dependable single source shopping for soundly engineered and competitively priced circuit breakers, consumer units and other electrical safety wiring accessories....
release date: 02/09/2009
view the full press release |
|
|
|
|
| |
Waveform Development Time Shortens for Software Defined Radios the JTRS Program WNM-SiS (Signals in Space)
August 6, 2009, Reno Nevada, USA -- Software defined radio (SDR) application development can now be much shorter thanks to the new AD350 PMC expansion card from 4DSP Inc....
release date: 05/08/2009
view the full press release |
|
|
|
|
|
< previous next > |
|
|
|
