|
|
|
| |
|
|
| |
|
|
| |
NEW MACHINE MODEL SIMPLIFIES AND IMPROVES SECONDARY DEBURRING OF PRECISION PARTS AFTER GRINDING AND HONING
To meet stringent industry demands for smooth surfaces of workpieces subject to mechanical stress in miniaturized assemblies, Otec Precision Finish, Inc. is introducing a new type of centrifugal disc finishing machine to the US market. Applying tribology, the study of friction, lubrication and wear on surfaces, OTEC engineers developed a secondary deburring process that preserves the precise measurement tolerances achieved by final grinding and honing processes and that also offers increased protection to delicate work parts.
The CF-oil system replaces the traditional water/compound mix technology that produces excellent results for larger parts. Using commercially available grinding and honing oils in combination with oil-resistant, low abrasive media (such as sintered ceramic chips), the new OTEC CF-Oil machine is aggressive enough to remove micro-burrs on work pieces without compromising the dimensional integrity achieved through final grinding. The PLC automated process takes just minutes to generate small edge radii and smooth surfaces, while eliminating the possibility of corrosion. As workpieces are protected from rusting, they no longer require three steps: degreasing before processing, drying after processing and subsequent re-greasing, thereby saving production costs.
Using oil means almost no wear and tear on the processing media. Media is recirculated, keeping consumable costs low. A specially designed separator allows workpieces and media to be sorted easily and quickly. Also, the grinding oil can be reused, extending its estimated service life by up to six months and possibly longer if filters are used, by connecting it up to a central filtration system.
OTEC CF-Oil machines with flow-optimized process containers are cost effective to integrate into a production line. No water connection or other complicated logistics are required. Occupying only a square meter of surface space, it can be used, for example, as a dedicated secondary deburring cell next to a grinding or honing machine. The unit can be connected to upstream grinding or honing equipment to save costs. Unlike water/compound solutions for finish grinding that require complex filtering of the media, there is no need for centrifuge or microfiltration units with CF-Oil processing.
The CF-Oil is highly effective for a range of smoothing tasks in high-tech aerospace and diesel fuel injection manufacturing processes. The CF-Oil machine and oil/abrasion-resistant chip method is non-aggressive. It is designed to smooth polished workpiece surfaces and to maintain precision tolerances, while simultaneously increasing productivity and reducing costs.
Otec is pleased to advise on the best CF-OIL configuration and media/oil mix to maximize productivity and consistently yield the desired results. The company processes sample parts on request by contacting +1-401-398-0045.
More information: Ed Pastore - General Manager
OTEC Precision Finish, Inc. 44 Cross Park Avenue, North Kingstown, RI 02852
Tel: + 1-401-398-0045 Fax: + 1-401-398-0056 E-Fax: 1-419-818-0519
E-mail: sales@otecusa.com Web: www.otecusa.com
High res image can be downloaded from: www.clickintopr.com/editors/articleDetail.asp?pjID=235
January 13, 2005
|
|
|
|
|
|
|
|
|
| |
Please feel free to use the news
releases and images on this site in your publications
(printed or online).
Contact details for further information
are given at the end of each release. |
|
| |
|
|
| |
|
|
| |
|
|
| |
Recent Press Releases: |
|
| |
|
|
| |
Certification for Enterprise Manufacturing Solutions from QiSOFT
SAP certification has been awarded to Leyland based QiSOFT for a new browser-based version of its enterprise manufacturing intelligence software suite, QIS - ERP1.0. This new version was developed using the SAP NetWeaver technology platform and it fully integrates with the QiSOFT software and other third party systems through SAP XI/SAP PI interfaces....
release date: 16/08/2010
view the full press release |
|
|
|
|
| |
Sussex Sound Therapy Expert to Hold Awareness Event
One of the leading pioneers in Sound Therapy is planning a special event at the University of Chichester so people can get a taste of the life changing and healing benefits of sound therapy and help her mark the tenth birthday of the academy....
release date: 13/05/2010
view the full press release |
|
|
|
|
| |
Eight New FMC Boards Offer Up to 5 Gig Samples/Sec
Reno Nevada, USA - The release of eight new analog-to-digital / digital-to-analog boards based on the FPGA mezzanine card standard (FMC) has been announced by 4DSP, LLC.
...
release date: 10/03/2010
view the full press release |
|
|
|
|
| |
Digital Bury Glimpses the Future in 02 Technical Chief's Talk
On Thursday evening Dr Mike Short, vice president of research and development at Telefonica Europe, gave an enthusiastic audience from the digital and creative community in Bury an insight into the connected world....
release date: 04/03/2010
view the full press release |
|
|
|
|
| |
Top R&D Man at O2 To Give Bury Digital Business Group an Exclusive Talk
Dr Mike Short, vice president for research and development at leading European mobile phone company Telefonica O2
Dr Mike Short, vice president for research and development at leading European mobile phone company Telefonica O2 UK, is to address a meeting of Digital Bury on February 25, 2010....
release date: 12/01/2010
view the full press release |
|
|
|
|
| |
Advanced DSP Application Design Will Be a Blast With New Xilinx Virtex 6 FPGA Based XMC & PMC Boards
The FM680, the first in a series of Xilinx Virtex 6 FPGA based XMC and PMC boards, has been launched by 4DSP Inc....
release date: 07/12/2009
view the full press release |
|
|
|
|
| |
Not All Golf Clubs Sold Online are Fake Says Golf Marketplace Backed by 180 PGA Professionals
In the light of the recent Ebay counterfeit golf equipment scandal, perpetrated by a global criminal gang over several years and raking in millions, JamGolf.com Marketplace is spearheading a campaign to assure online shoppers that they can still buy genuine golf clubs and accessories on the web at low prices....
release date: 29/09/2009
view the full press release |
|
|
|
|
| |
Video Imaging and Compression Performance Breaks the Price-Performance Barrier in Three VID300 Series PMCs launched by 4DSP
The new Altera Cyclone III FPGA based video image and compression boards offers excellent cost-performance with abundant FPGA logic resources for specialized image processing....
release date: 24/09/2009
view the full press release |
|
|
|
|
| |
New Online Electrical Protection Store Leads with CPN Consumer Units and Circuit Breakers
To provide a cost effective alternative to the generalist DIY superstore, DirecElec has launched their online store for electrical protection devices. The company offers dependable single source shopping for soundly engineered and competitively priced circuit breakers, consumer units and other electrical safety wiring accessories....
release date: 02/09/2009
view the full press release |
|
|
|
|
| |
Waveform Development Time Shortens for Software Defined Radios the JTRS Program WNM-SiS (Signals in Space)
August 6, 2009, Reno Nevada, USA -- Software defined radio (SDR) application development can now be much shorter thanks to the new AD350 PMC expansion card from 4DSP Inc....
release date: 05/08/2009
view the full press release |
|
|
|
|
|
< previous next > |
|
|
|
